Upsun flash light
Company Profile Products Quality Control Services Contact Email Upsun flash light
    Upsun flash light
Company Profile
Products
Prepare to Fly

IMPORTANT!:
1. RECOMMEND TO ALWAYS FLY YOUR POWER AIR SURFER IN LARGE WIDE OPEN GRASSY AREAS THAT ARE FREE OF OBSTACLES, OVERHEAD WIRES, TREES, BUILDINGS, AND OTHER OBSTRUCTIONS.
2. FLYING IN LIGHT WINDS ON A CLEAR DAY IS BEST.
3. DO NOT FLY IN VERY WINDY CONDITIONS.
4. FLYING IN HIGH WINDS MAY RESULT IN POOR FLIGHT PERFORMANCE AND MAY CAUSE YOUR PLANE TO FLY OUT OF CONTROL, CRASH AND BECOME DAMAGED.
5. MAKE SURE THAT THE RECHARGEABLE PLANE BATTERY IS FULLY CHARGED BEFORE FLYING.
1. Insert Antenna about 3 inches into controller and screw-in clockwise.
2. Hook the Wind Ribbon around the Antenna and ‘click’ into place.
3. Fully extend Antenna to about 3 feet.
4. Turn on the controller by pushing the power ON/OFF switch up .The red ON/OFF indicator should light up when the controller is in use.
5. BOTTOM VIEW

1. Hold the controller and turn your body around until the wind ribbon is blowing towards you .Now you are standing against the wind.
2. FLYING ALERT! Keep the plane and propellers away from your face and eyes when you launch.
With a firm grip, hold the plane above your head and PARALLEL to the ground.
3. Press the PROPELLER ON/OFF button ONCE to start propellers.

Flying Surfer
Quality Control
Services
Contact
Email
English Version
Chinese Big5
Chinese GB
 

Upsun logo
© 2002 Shenzhen Upsun All rights reserved.   Power by Hi-Blue
URL:http://www.upsuncn.com     Email:Sales@upsuncn.com
Address:Shenzhen Upsun Plactis Co.,Ltd.    Tel:+86-755-4085299     Fax:+86-755-4085268