2. Place top wing onto Fuselage. Then fasten together by inserting Plug A and Plug B until secure as shown.

3. Take each Strut with Propeller and attach it to the underside of the Top Wing.
Make sure that the strut’s wire is on the bottom and each propeller is facing the plane’s tail and as shown.

4. Insert Rivets to fasten strut to top wing.
TIP: If it is difficult to insert the rivet from one side, try inserting from the other side.

5. Flip the Fuselage over (the top wing should be lying on the ground).
Now take the Bottom Wing and attach to bottom of Fuselage and Struts. To fasten together, insert Rivets.