Charging Battery
	1. To install batteries into Field Charger, unscrew multiple screws on Battery Cover. Insert eight “C” size alkaline batteries (not included), making sure to match the polarity direction. Replace Battery Cover.
	2. Install 7.2V rechargeable plane battery by plugging the Connector to the Port, until you hear a click as shown.
	3. Turn the OFF/CHARGE switch to CHARGE, which starts a 25-30 minute charge. The red POWER light should glow, indicating that the Field Charger has enough power to charge and the flashing green CHARGE light indicates that charging has started.
	4. When the green CHARGE light turns off, the rechargeable plane battery is ready for use. Turn the OFF/CHARGE switch to OFF. To remove rechargeable plane battery, press Plug and pull as shown.

IMPORTANT: If the red light does not glow, then the “C” size batteries (not included) may be installed incorrectly or the batteries may be old or defective.